Added strength where a roof needs it most, a fabric-reinforced Conklin system that bridges seams, cracks, and high-stress areas into one tough, continuous membrane on flat and low-slope commercial roofs across Syracuse, NY.
Free on-site inspection · No obligation · Commercial and industrial roofs only
Free inspection
Can your roof be restored?
Eli or Simon climbs your roof, tells you straight, and charges nothing for the answer.
Takes about 30 seconds. Eli or Simon replies personally, usually the same day.
What It Is
Extra Strength for High-Stress Roofs
Fabric-reinforced roofing embeds a polyester reinforcing fabric directly into the Conklin coating, dramatically increasing tensile strength and puncture resistance. The fabric spans seams, laps, cracks, and detail areas, locking the entire assembly into one continuous, fully adhered membrane over EPDM, TPO, modified bitumen, built-up roofing, or metal.
It is the heavy-duty tier of roof restoration — the right call for roofs with heavy foot traffic, chronic ponding, or a history of seam failures, common on Mohawk Valley warehouses and plants. Like every Conklin coating, the finished membrane is reflective and cool-roof rated, lowering rooftop temperatures through the long Syracuse, NY summer.
Reinforcing fabric for superior strength
Bridges seams, cracks, and movement
Ideal for high-traffic and ponding roofs
Continuous, fully adhered, and watertight
Why It Pays Off
Why Fabric-Reinforced
Fabric reinforcement is the toughest restoration option for demanding commercial roofs — the choice when a standard coating alone is not enough.
By bridging the exact points where flat roofs fail — seams, laps, penetrations, and ponding zones — it extends roof life by decades while avoiding the cost and downtime of a full tear-off and replacement.
Save 50–70%
A restoration system costs a fraction of a full tear-off and replacement.
Lower Energy Bills
Reflective systems cut roof surface temps and cooling costs all summer.
Renewable Warranty
Conklin-backed warranties of 10, 15, or 18 years — and renewable after.
No Tear-Off
Installed over the existing roof — nothing goes to the landfill.
Zero Disruption
Tenants and operations keep running during installation.
Extends Roof Life
Adds decades of watertight protection to the existing roof.
What We Offer
Where It Shines
Fabric reinforcement adds durability exactly where commercial roofs fail — seams, high-traffic zones, and standing-water areas.
High-Traffic Roofs
Stand up to foot traffic, equipment, and maintenance access.
Seam & Crack Bridging
Reinforce failing seams and cracks into one continuous membrane.
Ponding Areas
Extra strength and waterproofing where water collects.
How It Works
Our Fabric-Reinforced Roofing Process
STEP 01
Free Inspection
Eli or Simon inspects the roof in person and provides a written condition report.
STEP 02
Clean & Prep
We power-wash, repair seams, and prime — the system only lasts if prep is right.
STEP 03
Install the System
A trained Conklin crew installs the fully adhered, continuous system to manufacturer specification.
STEP 04
Inspect & Warranty
The completed system is documented and inspected to activate the renewable manufacturer warranty.
Why Mohawk Valley
8-Time Conklin Preferred Contractor
A fabric-reinforced system holds up only when it is installed correctly — fabric fully embedded and saturated, with every seam reinforced at full mil thickness. Mohawk Valley Roofing has earned Conklin’s Preferred Contractor designation eight separate times by meeting that standard on every project since 2013 — owner Eli Byler personally inspects each roof before work begins, crews are factory-trained and manufacturer-certified, and every completed system is documented and inspected to activate its renewable Conklin warranty.
Based in Little Falls, the team serves commercial properties across Syracuse, NY and the greater Mohawk Valley — Utica, Rome, Herkimer, Syracuse, Albany, Schenectady, Saratoga Springs, Cooperstown, and Oneonta — staying local for warranty support and recoats for the life of the roof.
Factory-trained, manufacturer-certified crews
American-made Conklin systems
Eli personally inspects every roof — no photo quotes
Renewable warranties, documented and inspected
Our Work
Recent Fabric-Reinforced Roofing Projects
8+
Conklin Preferred Contractor
FAQ
Everything to Know About Fabric-Reinforced Roofing
Straight answers from the team that installs and stands behind every roof.
What is fabric-reinforced roofing?
It is a Conklin coating system with a polyester fabric embedded into it, adding tensile strength and bridging seams, laps, and cracks. The reinforcement turns the coating into a far more durable, puncture-resistant membrane.
When is it the right choice over a standard coating?
For roofs with heavy foot traffic, chronic ponding water, rooftop equipment, or a history of seam failures, the added reinforcement is well worth it. It is also ideal for transitions and detail-heavy roofs where movement cracks standard coatings.
Is it still a no-tear-off system?
Yes. It installs directly over the existing roof after proper cleaning, prep, and repair — no tear-off, no landfill disposal, and no downtime for the building.
Does it carry a warranty?
Yes — a renewable Conklin manufacturer warranty of 10, 15, or 18 years, which can be extended with a recoat at the end of the term.
A free, no-obligation on-site assessment from the Syracuse, NY contractor that installs every Conklin system to manufacturer specification — and stands behind it.