Home › Commercial Roofing › Spray Foam
Commercial Roofing · Utica, NY
Spray Foam Roofing in Utica, NY
Insulation and waterproofing in one continuous, monolithic system, spray polyurethane foam that seals a commercial roof and raises its R-value, installed across Utica, NY and the Mohawk Valley.
Can your roof be restored?
Eli or Simon climbs your roof, tells you straight, and charges nothing for the answer.
Takes about 30 seconds. Eli or Simon replies personally, usually the same day.
What It Is
Insulation and Waterproofing in One
Spray polyurethane foam (SPF) roofing is applied as a liquid that expands into a continuous, fully adhered layer of rigid insulation, self-flashing around every curb, drain, and penetration into a monolithic surface with no seams or fasteners for water to exploit. A reflective Conklin top coat then protects the foam and locks in the warranty.
The result is a self-flashing roof with one of the highest R-values of any commercial system and significant energy savings — a major advantage for Mohawk Valley owners facing high winter heating bills. Because the top coat is renewable, an SPF roof can be recoated and re-warranted indefinitely across Utica, NY.
- Continuous, self-flashing, fully adhered
- High R-value insulation built in
- Eliminates seams and ponding
- Reflective top coat with renewable warranty
Why It Pays Off
Why Choose SPF
SPF is the most energy-efficient continuous roofing system available for commercial buildings — insulation, waterproofing, and a cool-roof surface in a single application.
It is especially well suited to Utica, NY’s climate, where the combination of high R-value and a reflective coating cuts both heating and cooling load on flat and low-slope roofs year-round.
Save 50–70%
A restoration system costs a fraction of a full tear-off and replacement.
Lower Energy Bills
Reflective systems cut roof surface temps and cooling costs all summer.
Renewable Warranty
Conklin-backed warranties of 10, 15, or 18 years — and renewable after.
No Tear-Off
Installed over the existing roof — nothing goes to the landfill.
Zero Disruption
Tenants and operations keep running during installation.
Extends Roof Life
Adds decades of watertight protection to the existing roof.
What We Offer
What's Included
A complete SPF system from substrate to top coat — rigid foam insulation, self-flashing detail work, and a reflective protective Conklin coating.
Continuous Foam Base
Expanding foam that self-flashes around every penetration and curb.
Built-In Insulation
High R-value insulation that cuts heating and cooling costs.
Reflective Top Coat
A protective, reflective coating that waterproofs and extends life.
How It Works
Our Spray Foam Roofing Process
STEP 01
Free Inspection
Eli or Simon inspects the roof in person and provides a written condition report.
STEP 02
Clean & Prep
We power-wash, repair seams, and prime — the system only lasts if prep is right.
STEP 03
Install the System
A trained Conklin crew installs the fully adhered, continuous system to manufacturer specification.
STEP 04
Inspect & Warranty
The completed system is documented and inspected to activate the renewable manufacturer warranty.
Why Mohawk Valley
8-Time Conklin Preferred Contractor
An SPF roof performs for decades only when it is installed correctly — a clean, dry substrate, foam at the right density and thickness, and a full-mil reflective top coat. Mohawk Valley Roofing has earned Conklin’s Preferred Contractor designation eight separate times by meeting that standard on every project since 2013 — owner Eli Byler personally inspects each roof before work begins, crews are factory-trained and manufacturer-certified, and every completed system is documented and inspected to activate its renewable Conklin warranty.
Based in Little Falls, the team serves commercial properties across Utica, NY and the greater Mohawk Valley — Utica, Rome, Herkimer, Syracuse, Albany, Schenectady, Saratoga Springs, Cooperstown, and Oneonta — staying local for warranty support and recoats for the life of the roof.
- Factory-trained, manufacturer-certified crews
- American-made Conklin systems
- Eli personally inspects every roof — no photo quotes
- Renewable warranties, documented and inspected
Our Work
Recent Spray Foam Roofing Projects
8+
Conklin Preferred Contractor
FAQ
Everything to Know About Spray Foam Roofing
Straight answers from the team that installs and stands behind every roof.
What is SPF roofing?
Spray polyurethane foam is applied as a liquid that expands into a continuous layer of rigid insulation, then receives a reflective protective coating. The result is insulation and a waterproof membrane in one monolithic, self-flashing system.
Does SPF really save energy?
Yes. The built-in R-value of the foam plus a reflective cool-roof top coat can significantly lower both heating and cooling costs — a major advantage through Utica, NY’s long heating season.
Can SPF go over an existing roof?
In most cases, yes. SPF can be applied over many existing roof types — including built-up, metal, and single-ply — after proper cleaning and prep, avoiding a costly tear-off.
How is an SPF roof maintained?
The reflective top coat is renewable. Periodic recoating keeps the foam protected and the warranty active for decades, making SPF one of the longest-lasting commercial roof systems available.
More Ways We Help
Related Commercial Roofing Services
Roof Inspection
Metal Restoration
Membrane Restoration
Roof Coating
Free Estimate
Ready to Protect the Roof Asset?
A free, no-obligation on-site assessment from the Utica, NY contractor that installs every Conklin SPF system to manufacturer specification — and stands behind it.