Free on-site inspection · No obligation · Commercial and industrial roofs only
Free inspection
Can your roof be restored?
Eli or Simon climbs your roof, tells you straight, and charges nothing for the answer.
Takes about 30 seconds. Eli or Simon replies personally, usually the same day.
What It Is
Renew the Metal Roof Instead of Replacing It
Metal roof restoration uses a fully adhered Conklin coating system to seal rusting panels, leaking seams, and loose fasteners on standing-seam, R-panel, and corrugated metal roofs — locking them into one continuous, reflective, watertight membrane installed directly over the existing roof with no tear-off.
It stops corrosion in its tracks, eliminates leaks, and resets the warranty clock at a fraction of replacement cost. As an Energy Star and CRRC-rated cool roof, the reflective finish also lowers rooftop temperatures and cooling load for Mohawk Valley warehouses, barns, and manufacturing buildings.
Seals seams, fasteners, and rusted panels
Reflective finish that cuts cooling costs
Renewable 10, 15, or 18-year warranty
No tear-off and no operational downtime
Why It Pays Off
Why Restore a Metal Roof
A restoration coating protects a metal roof for decades — for far less than the cost of tearing it off and re-roofing — eliminating the rust, seam leaks, and fastener backout that age every metal roof while keeping the building dry and in service.
In Rome, NY, where snow load and freeze-thaw accelerate metal corrosion, restoration is often the most cost-effective way to add 15 to 20 years of watertight life to an aging roof.
Save 50–70%
A restoration system costs a fraction of a full tear-off and replacement.
Lower Energy Bills
Reflective systems cut roof surface temps and cooling costs all summer.
Renewable Warranty
Conklin-backed warranties of 10, 15, or 18 years — and renewable after.
No Tear-Off
Installed over the existing roof — nothing goes to the landfill.
Zero Disruption
Tenants and operations keep running during installation.
Extends Roof Life
Adds decades of watertight protection to the existing roof.
What We Offer
What's Included
A complete metal roof restoration system — rust treatment and priming, seam and fastener reinforcement, and a reflective Conklin top coat — installed to manufacturer specification.
Rust Treatment & Priming
We treat corrosion and prime bare metal so the system bonds and lasts.
Seam & Fastener Sealing
Every seam and fastener is reinforced and encapsulated against leaks.
Reflective Top Coat
A continuous, reflective Conklin coating that waterproofs and cools the roof.
How It Works
Our Metal Roof Restoration Process
STEP 01
Free Inspection
Eli or Simon inspects the roof in person and provides a written condition report.
STEP 02
Clean & Prep
We power-wash, repair seams, and prime — the system only lasts if prep is right.
STEP 03
Install the System
A trained Conklin crew installs the fully adhered, continuous system to manufacturer specification.
STEP 04
Inspect & Warranty
The completed system is documented and inspected to activate the renewable manufacturer warranty.
Why Mohawk Valley
8-Time Conklin Preferred Contractor
A metal restoration lasts only when it is installed correctly — corrosion treated and primed, every seam and fastener reinforced, and the coating applied at full mil thickness. Mohawk Valley Roofing has earned Conklin’s Preferred Contractor designation eight separate times by meeting that standard on every project since 2013 — owner Eli Byler personally inspects each roof before work begins, crews are factory-trained and manufacturer-certified, and every completed system is documented and inspected to activate its renewable Conklin warranty.
Based in Little Falls, the team serves commercial properties across Rome, NY and the greater Mohawk Valley — Utica, Rome, Herkimer, Syracuse, Albany, Schenectady, Saratoga Springs, Cooperstown, and Oneonta — staying local for warranty support and recoats for the life of the roof.
Factory-trained, manufacturer-certified crews
American-made Conklin systems
Eli personally inspects every roof — no photo quotes
Renewable warranties, documented and inspected
Our Work
Recent Metal Roof Restoration Projects
8+
Conklin Preferred Contractor
FAQ
Everything to Know About Metal Roof Restoration
Straight answers from the team that installs and stands behind every roof.
Can a rusting metal roof be restored?
Yes. The corrosion is treated and primed first, then sealed under a fully adhered coating system that stops further rust.
How much can restoration save versus replacement?
Typically 50–70% less than a full metal roof replacement, with no tear-off and no downtime.
Will restoration stop active leaks?
Yes. Every seam, fastener, and penetration is reinforced and encapsulated into a continuous, watertight membrane.
What warranty comes with it?
A renewable Conklin manufacturer warranty of 10, 15, or 18 years.
A free, no-obligation on-site assessment from the Rome, NY contractor that installs every Conklin system to manufacturer specification — and stands behind it.