Renew an aging flat or low-slope roof with a fully adhered, continuous, reflective Conklin system, stopping leaks and ponding without a costly tear-off, across Rome, NY and the Mohawk Valley.
Free on-site inspection · No obligation · Commercial and industrial roofs only
Free inspection
Can your roof be restored?
Eli or Simon climbs your roof, tells you straight, and charges nothing for the answer.
Takes about 30 seconds. Eli or Simon replies personally, usually the same day.
What It Is
Renew the Flat Roof Instead of Replacing It
Flat and low-slope roofs are prone to ponding water, seam failures, and slow leaks that go unnoticed until they reach the interior. Flat roof restoration seals the entire roof in a fully adhered, watertight coating membrane installed directly over the existing surface — built-up, modified bitumen, EPDM, TPO, or PVC.
It eliminates leaks, improves drainage performance, and adds a fresh renewable warranty at a fraction of tear-off cost. As an Energy Star and CRRC-rated cool roof, the reflective finish also lowers rooftop temperatures and cooling load through the long Rome, NY summer.
Seals seams, splits, and ponding areas
Continuous, fully adhered, reflective finish
Renewable 10, 15, or 18-year warranty
No tear-off and no business interruption
Why It Pays Off
Why Restore a Flat Roof
Restoration is the smart, low-disruption fix for leaking low-slope roofs — no tear-off, no landfill waste, and no shutdown for the building. It restores a sound roof to like-new performance and defers a major capital replacement by 10 to 20 years.
Save 50–70%
A restoration system costs a fraction of a full tear-off and replacement.
Lower Energy Bills
Reflective systems cut roof surface temps and cooling costs all summer.
Renewable Warranty
Conklin-backed warranties of 10, 15, or 18 years — and renewable after.
No Tear-Off
Installed over the existing roof — nothing goes to the landfill.
Zero Disruption
Tenants and operations keep running during installation.
Extends Roof Life
Adds decades of watertight protection to the existing roof.
What We Offer
What We Restore
Continuous Conklin systems for every common flat-roof type — built-up, modified bitumen, EPDM, TPO, and PVC.
Built-Up & Mod-Bit
Renew aging BUR and modified-bitumen roofs with a continuous coating.
Single-Ply & EPDM
Re-seal and re-warranty TPO, PVC, and rubber membranes.
Ponding Solutions
Targeted treatments for chronic standing-water areas.
How It Works
Our Flat Roof Restoration Process
STEP 01
Free Inspection
Eli or Simon inspects the roof in person and provides a written condition report.
STEP 02
Clean & Prep
We power-wash, repair seams, and prime — the system only lasts if prep is right.
STEP 03
Install the System
A trained Conklin crew installs the fully adhered, continuous system to manufacturer specification.
STEP 04
Inspect & Warranty
The completed system is documented and inspected to activate the renewable manufacturer warranty.
Why Mohawk Valley
8-Time Conklin Preferred Contractor
A flat roof restoration lasts only when it is installed correctly — surface cleaned and primed, ponding areas and seams reinforced, and the coating applied at full mil thickness. Mohawk Valley Roofing has earned Conklin’s Preferred Contractor designation eight separate times by meeting that standard on every project since 2013 — owner Eli Byler personally inspects each roof before work begins, crews are factory-trained and manufacturer-certified, and every completed system is documented and inspected to activate its renewable Conklin warranty.
Based in Little Falls, the team serves commercial properties across Rome, NY and the greater Mohawk Valley — Utica, Rome, Herkimer, Syracuse, Albany, Schenectady, Saratoga Springs, Cooperstown, and Oneonta — staying local for warranty support and recoats for the life of the roof.
Factory-trained, manufacturer-certified crews
American-made Conklin systems
Eli personally inspects every roof — no photo quotes
Renewable warranties, documented and inspected
Our Work
Recent Flat Roof Restoration Projects
8+
Conklin Preferred Contractor
FAQ
Everything to Know About Flat Roof Restoration
Straight answers from the team that installs and stands behind every roof.
Can ponding water be fixed?
Yes. Mohawk Valley treats ponding areas and improves drainage performance, then seals the roof in a fully adhered, watertight membrane built to handle standing water far better than the original surface.
Do I need a full tear-off?
Usually not. Restoration installs over the existing flat roof after cleaning, prep, and repair — typically saving 50–70% versus a full tear-off and replacement, with no downtime.
What flat roofs can be restored?
Built-up roofing, modified bitumen, EPDM, TPO, and PVC low-slope roofs are all strong candidates. Suitability is confirmed during the on-site inspection.
What warranty do I get?
A renewable Conklin manufacturer warranty of 10, 15, or 18 years, extendable with a recoat at the end of the term.
A free, no-obligation on-site assessment from the Rome, NY contractor that installs every Conklin system to manufacturer specification — and stands behind it.