Home › Commercial Roofing › Single-Ply
Commercial Roofing · Schenectady, NY
Single-Ply Membrane Roofing in Schenectady, NY
Durable, energy-efficient TPO and PVC single-ply systems for new and replacement low-slope commercial roofs across Schenectady, NY and the Mohawk Valley.
Can your roof be restored?
Eli or Simon climbs your roof, tells you straight, and charges nothing for the answer.
Takes about 30 seconds. Eli or Simon replies personally, usually the same day.
What It Is
Proven Low-Slope Roofing Systems
Single-ply membrane roofing uses large sheets of TPO or PVC, heat-welded at the seams into a strong, watertight thermoplastic membrane. It is one of the most widely specified commercial roof systems for flat and low-slope buildings, prized for its reflective surface and proven longevity.
When a roof is past restoration, Mohawk Valley installs new single-ply systems built to last — with proper insulation, detailing, and reflective white surfaces that reduce rooftop temperatures and cooling load through the Schenectady, NY summer.
- Heat-welded, watertight seams
- Reflective TPO/PVC for energy savings
- Great for new builds and full replacements
- Backed by manufacturer warranties
Why It Pays Off
Why Single-Ply
Single-ply is a dependable, energy-smart choice when a new roof is the right call rather than a restoration coating. TPO and PVC membranes deliver decades of watertight, reflective performance backed by strong manufacturer warranties.
Save 50–70%
A restoration system costs a fraction of a full tear-off and replacement.
Lower Energy Bills
Reflective systems cut roof surface temps and cooling costs all summer.
Renewable Warranty
Conklin-backed warranties of 10, 15, or 18 years — and renewable after.
No Tear-Off
Installed over the existing roof — nothing goes to the landfill.
Zero Disruption
Tenants and operations keep running during installation.
Extends Roof Life
Adds decades of watertight protection to the existing roof.
What We Offer
Systems We Install
The leading single-ply membranes for commercial low-slope roofs — reflective TPO and chemical-resistant PVC.
TPO Membranes
Reflective, weldable thermoplastic for energy-efficient roofs.
PVC Membranes
Chemical- and fire-resistant single-ply for demanding facilities.
Full Replacements
Complete tear-off and re-roof when restoration isn’t an option.
How It Works
Our Single-Ply Membrane Roofing Process
STEP 01
Free Inspection
Eli or Simon inspects the roof in person and provides a written condition report.
STEP 02
Clean & Prep
We power-wash, repair seams, and prime — the system only lasts if prep is right.
STEP 03
Install the System
A trained Conklin crew installs the fully adhered, continuous system to manufacturer specification.
STEP 04
Inspect & Warranty
The completed system is documented and inspected to activate the renewable manufacturer warranty.
Why Mohawk Valley
8-Time Conklin Preferred Contractor
A single-ply roof performs for decades only when it is installed correctly — the membrane fully welded at every seam, flashings and penetrations detailed, and insulation properly specified. Mohawk Valley Roofing has earned Conklin’s Preferred Contractor designation eight separate times and brings that same standard to single-ply installs since 2013 — owner Eli Byler personally inspects each roof, crews are factory-trained and manufacturer-certified, and every completed system is documented and inspected to activate its manufacturer warranty.
Based in Little Falls, the team serves commercial properties across Schenectady, NY and the greater Mohawk Valley — Utica, Rome, Herkimer, Syracuse, Albany, Schenectady, Saratoga Springs, Cooperstown, and Oneonta — and stays local for service and warranty support.
- Factory-trained, manufacturer-certified crews
- American-made Conklin systems
- Eli personally inspects every roof — no photo quotes
- Renewable warranties, documented and inspected
Our Work
Recent Single-Ply Membrane Roofing Projects
8+
Conklin Preferred Contractor
FAQ
Everything to Know About Single-Ply Membrane Roofing
Straight answers from the team that installs and stands behind every roof.
What is the difference between TPO and PVC?
Both are reflective, heat-weldable single-ply membranes. PVC offers stronger chemical and fire resistance, making it ideal for restaurants and manufacturing, while TPO is cost-effective and highly energy-efficient for warehouses and retail.
Does Mohawk Valley do full replacements?
Yes. When a roof is past restoration, the team installs new single-ply systems with proper insulation and detailing — a complete tear-off and re-roof done to manufacturer specification.
Are single-ply roofs energy-efficient?
Yes. The reflective white surfaces of TPO and PVC reduce rooftop temperatures and cooling loads, and many qualify as Energy Star and CRRC-rated cool roofs.
What warranty is available?
Manufacturer warranties vary by membrane and thickness. Mohawk Valley specs the right coverage for each building and documents the install to activate it.
More Ways We Help
Related Commercial Roofing Services
Roof Inspection
Metal Restoration
Membrane Restoration
Roof Coating
Free Estimate
Ready to Protect the Roof Asset?
A free, no-obligation on-site assessment from the Schenectady, NY contractor that installs every system to manufacturer specification — and stands behind it.